Publication

• International Journal

• International Conference

• National Conference

• Books/Chapters/Proceedings/
  Journal Editorial Positions

• Patents

Patents

• Solar tree for energy generation. UK Patent Application no: 6277527. Date of Grant: May 02, 2023.
  https://www.registered-design.service.gov.uk/find/6277527
• Artificial intelligence based method for computer-aided progressive die design. WIPO Application no. 201941037055. Date of Filing: 14/09/2019 and Date of Publication: 20/09/2019.
  https://patentscope.wipo.int/search/en/detail.jsf?docId=IN275759437&_cid=P21-KL96UA-80434-1
• Vulcanizing fixture machine for tyre and detection method thereof. WIPO Application no. 201921052332. Date of Filing: 17/12/2019 and Date of Publication: 20/12/2019.
  https://patentscope.wipo.int/search/en/detail.jsf?docId=IN283283162&tab=NATIONALBIBLIO&_cid=P20-K7VM10-14767-1

Courses Attended

• Attended Webinar on “New Education Policy 2020- A Road Map for Technical Education” delivered by Prof. Sunil Kumar, Vice Chancellor, RGPV, Bhopal, organized by UBA Cell, Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 September 23, 2020.
• Attended Programme on “Leadership: Strategy, Style and Score Card in Educational Institutions” organized by Indian Institute of Management Ahmedabad under TEQIP -3 during September 11 to 13, 2020.
• Attended “Capacity Building Program on Mind Management” organized by Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 during June 24 to 27, 2020.
• Attended Faculty Development Programme on “Capacity Building for Directors & Principals” conducted for Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal organized by Indian Institute of Management Raipur under TEQIP-3 on June 23, 2020.
• Attended the Webinar on “Role of 3D Printing during COVID-19 Pandemic” organized by Department of Mechanical Engineering, Bipin Tripathi Kumaon Institute of Technology, Dwarahat on June 1, 2020.
• Attended One Week Faculty Development Program on “Advanced NDT Techniques & Applications in Industry” organized by Indian Society for Non Destructive Testing, Hyderabad Chapter in association with Department of Mechanical Engineering, QISCET, Ongole during May 25-29, 2020.
• Attended online Workshop on “Universal Human Values” on the theme “Inculcating Universal Human Values in Technical Education” organized by All India Council for Technical Education(AICTE) during 26-30 April, 2020.
• Attended “Capacity Building Programme” conducted for RGPV under TEQIP-III organized by Indian Institute of Management Indore during November 11-13, 2019.
• Attended “NAAC Awareness Programme on Assessment and Accreditation” organized by Internal Quality Assurance Cell, Jiwaji University, Gwalior on August 03, 2018.
• Attended AICTE Sponsored Short Term Course on “Additive Manufacturing” organized by Indian Institute of Technology, Kanpur during February 05 to 09, 2018.
• Attended Workshop on “Methodology for Preparation of High Quality Research Project and Networking among MPCST & University/Colleges” organized by M. P. Council of Science & Technology, Bhopal on January 16, 2018.
• Attended Short Term Course on “Recent Advancement in Product Design, Manufacturing and Maintenance Techniques” organized by PDPM Indian Institute of Information Technology, Design and manufacturing, Jabalpur during September 16 to 20, 2017.
• Attended Short Term Course on “Advances in Manufacturing Systems” organized by Department of Mechanical and Automobile Engineering, Madhav Institute of Technology & Science, Gwalior during February 16 to 22, 2017.
• Attended Short Term Course on “Industrial Engineering Techniques”organized by Department of Mechanical Engineering, Maulana Azad National Institute of TechnologyduringMay 20 to 24, 2014.
• Attended Short Term Course on “Advance Engineering Optimization through Intelligent Techniques” organized by Department of Mechanical Engineering, SardarVallabhbhai National Institute of Technology (SVNIT), Surat duringJanuary 07 to 11, 2013.
Read More

Courses Attended

• Attended Short Term Course on “Micro-manufacturing” organized by Department of Mechanical Engineering, Indian Institute of Technology Kanpur duringNovember 05 to 10, 2012.
• Attended Short Term Course on “Micro-manufacturing” organized by Department of Mechanical Engineering, Indian Institute of Technology Kanpur during September 02 to 08, 2010.
• Attended Workshop on “Quality Assurance in Technical Education”organized by Madhav Institute of Technology and Science, Gwalior duringFebruary06-07, 2010.
• Attended Short Term Course on “Competency Mapping & Feedback”organized by Department of Humanities and Social Sciences, Indian Institute of Technology Kharagpur during December 14 to 20, 2009.
• Attended Short Term Course on “Educational Leadership”organized by Centre for Educational Technology, Indian Institute of Technology Kharagpur duringSeptember14 to 20, 2009.
• Attended Workshop on “Intellectual Property Rights”organized by ABV- Indian Institute of Information Technology and Management, Gwalior duringMarch 14-15, 2009.
• Attended Short Term Course on “Sustainable Environment Management”organized by Department of Chemistry,Jaipur Engineering College duringFebruary 21-25, 2009.
• Attended Short Term Course on “Recent Trends in Industrial & Production Engineering” organized by Department of Industrial & Production Engineering, Shri G. S. Institute of Technology and Science, Indore during November 10 to 14, 2008.
• Attended Short Term Course on “e-Business”organized by ABV- Indian Institute of Information Technology and Management, Gwalior duringJuly 21-25, 2008.
• Attended Short Term Course on “Micro-machining” organized by Department of Mechanical Engineering, Indian Institute of Technology Bombay during June 2 to 7, 2008.
• Attended Short Term Course on “Rapid Product Development” organized by Department of Mechanical Engineering, Indian Institute of Technology Guwahati duringDecember 11 to 15, 2006.
• On line course work on “Basics of Jigs & Fixtures” from Tooling University, Ohio (U.S.A.) in 2004.
• Attended 21 days summer training program at Bhilai Steel Plant, Bhilai.

Engagements

• Delivered talk on “Human-Centric AI in Industry 5.0: Collaborating with Cobots in Auto Manufacturing” on October 29, 2025 in ATAL FDP on Applications of AI in Automobile Engineering organized by RustamJi Institute of Technology, BSF Academy, Gwalior during October 27 to November 01, 2025.
• Organized ATAL Offline FDP on Industry 5.0: Human-Centric Smart Manufacturing during July 21 to 26, 2025 at Vikrant University Gwalior (Coordinator).
• Delivered talk on “Advancements in Manufacturing Processes: Industrial Revolutions” on January 17, 2025 in ATAL FDP on Next-Generation Manufacturing: Harnessing Digital Technologies for Industrial Transformation organized by SAGE University, Bhopal during January 13 to 18, 2025.
• 4th International Conference on “Materials, Mechanics, Mechatronics and Manufacturing” (IC4M 2023) during December 29, 2024 (Conference Co-Chair). Special Issue: Sage Publication.
• First International Conference on “Machine Intelligence and Cyber-Physical Systems” (ICMICPS 2023) during December 23-24, 2023 (Conference Co-Chair). Proceedings: Wiley Publisher
• Delivered talk on “Academic Integrity and Professional Ethics: Social Implications” on June 21, 2023 in 5-Day Faculty Development Programme on Academic Integrity and Professional Ethics organized by Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore under the aegis of Association of Indian Universities during June 20 to 24, 2023.
• 3rd International Conference on “Materials, Mechanics, Mechatronics and Manufacturing” (IC4M 2023) during April 15-16, 2023 (Conference Co-Chair). Proceedings: Materials Today.
• A First International Conference on “Material Science, Mechanics, and Technology” (ICMMT 2022) during December 23-24, 2022 (Conference Chair). Proceedings: Journal of Physics: IOP Conference Series
• 2nd International Conference on “Materials, Mechanics, Mechatronics and Manufacturing” (IC4M 2022) during April 09-10, 2022 (Conference Co-Chair). Proceedings: Materials Today
• A First International Conference on Environmental Sustainability and Construction Technology (ICESCT 2021) held on December 18, 2022, (Conference Chair). Proceedings: ISBN
• AICTE-ISTE Sponsored Refresher Program on “Learner Oriented Teaching Methods” at IPS College of Technology & Management, Gwalior during February 10-16, 2021 (Coordinator).
• AICTE-ISTE Sponsored Refresher Program on “Learner Oriented Teaching Methods” at IPS College of Technology & Management, Gwalior during April 07-13, 2021 (Coordinator).
• An IOP International Conference on “Materials, Mechanics, Mechatronics and Manufacturing” (IC4M 2021) during March 07-08, 2021 (Conference Co-Chair).
• AICTE-ISTE Sponsored Refresher Program on “Learner Oriented Teaching Methods” at IPS College of Technology & Management, Gwalior during February 10-16, 2021 (Coordinator).
• Delivered talk on “Journey of Machine Tools: Conventional to CNC with IOT and Additive Manufacturing” on December 23, 2020 in One week Faculty Development Programme on Fundamentals and Applications of Additive Manufacturing (An Experimental Approach) organized by Rajkiya Engineering College, Mainpuri during December 21 to 25, 2020 under TEQIP-3.
Read More

Activities

• Organized STTP on “Python for Machine Learning and Applications” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 during August 24 to 30, 2020 (Coordinator).
• Organized STTP on “Multirate Digital Signal Processing” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 during August 24 to 30, 2020 (Coordinator).
• Organized Webinar on “Introduction to Stem Cells and their harvesting for 3D Bioprinting” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 on August 23, 2020 (Coordinator).
• Organized Webinar on “Web Forensics” at IPS College of Technology & Management, Gwalior in association with Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal under TEQIP -3 on August 22, 2020 (Coordinator).
• Delivered talk on “Latest Trends in Industrial Manufacturing System” in One week Faculty Development Programme on Recent Trends in Manufacturing System and Industrial Practices at S. V. Polytechnic College, Bhopal on March 07, 2020.
• A Workshop on “Cost Estimation of Machined Components” during June 10-22, 2019 at IPS College of Technology & Management, Gwalior (Convenor & Keynote Speaker).
• A Workshop on Metrology and NDT at IPS College of Technology & Management during October 19-20, 2016 (Convenor & Keynote Speaker).
• A Workshop on Metrology and NDT at Gayatri Auto Industries during March 12-13, 2016 (Convenor & Keynote Speaker).
• A Short Term Course on SolidWorks during January 27 - February 16, 20016 (Convenor).
• MPCST Sponsored Short Term Course on Additive Manufacturing at IPS College of Technology & Management during February 12-13, 2016 (Convenor).
• An International Conference on Futuristic Trend in Engineering, Science, Humanities, and Technology (FTESHT- 2016) during January 23-24, 2016 (Convenor).
• A Workshop on I.C. Engine Assembling and Dismantling at IPS College of Technology and Management during February 21-23, 2015 (Convenor & Keynote Speaker).
• An International Conference on Learning Community for Global Education Reform during November 18-20, 2011 (Member of Editorial Board).
• A Short Term Course on Gear Manufacturing at ShriRam Institute of Technology and Management during October 08-09, 2010 (Convenor).
• A Short Term Course on Pro-E at ShriRam College of Engineering and Management during July 09-23, 2008 (Convenor).
• A Short Term Course on Auto-CAD at ShriRam College of Engineering and Management during June 21 to July 08, 2008 (Convenor).
• A National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07) on April 28-29, 2007 (Sponsored by Department of Science & Technology, New Delhi) (Convenor).
• A Workshop on Maintenance & Safety during March 04-10, 2007 (Convenor).

Conferences Attended

• 2nd International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2019) organized by GL Bajaj Institute of Technology and Management, Greater Noida on May 3-5, 2019.
• 2nd International Conference on Advancement in Engineering, Applied Science and Management (ICAEASM-2017) organized by Conference Info in Association with Academic Science at (IIC, Delhi) India International Centre, 40, Max Mueller Marg, New Delhi on July 2, 2017.
• National Conference on Evolving Management Paradigms in Manufacturing and Service Sectors organized by Department of Management, IPS College of Technology & Management, Gwalior (M.P.) on March 16-17, 2017.
• 4th International Conference on Innovative Research in Engineering Science and Management organized by Conference Info and Gwalior Institute of Information Technology (GIIT), Gwalior at GIIT, Gwalior (M.P.) on May 08, 2016.
• International Conference on Advances in Engineering Science and Management organized by T.R. Publication, Agra (U.P.) on November 8, 2015.
• National Workshop on Research Methodology and Applied Statistics organized by Department of Physical Education, Institute of Professional Studies, Gwalior (M.P.) on May 25-31, 2015.
• International Conference on Future Trends in Structural, Civil, Environmental and Mechanical Engineering (FTSCEM-2013) held during July13-14, 2013 at Bangkok, Thailand.
• International Conference on Advances in Manufacturing and Technology Management (ICAMTM-2007) held on January 18-20. 2007 at Parshvanath College of Engineering, Thane.
• International Conference on Manufacturing Science and Technology 2006 held on August 28-30, 2006 at Multi Media University Melaka, Malaysia.
• National Conference on Energy & Environment held at held at Jaipur Engineering College, Jaipur, organized by Department of Mechanical Engineering on November 25-26, 2006.
• National Seminar on Emerging Trends in Communication & Control Technologies held at ShriRam College of Engineering & Management, Banmore on March 25-26, 2006.

International Journal Pub.

• Rathore, S. P. S., Kaushik, P., Chauhan, P. S., Sharma, R., & Rathore, R. (2025). AI and HR 5.0 : The Future of Recruitment. (2025). International journal of environmental sciences, 1589-1604. (Scopus)
  https://theaspd.com/index.php/ijes/article/view/3182/2423
• Koria, C., Kumar, R., Chauhan, P. S., Purohit, R., & Banoriya, D. (2025). The role of composites in lightweight engineering materials: a multi-scale analysis. Advances in materials and processing technologies, 1–13. (ESCI/ Scopus)
  https://doi.org/10.1080/2374068X.2025.2530985
• Sharma, J., Nayak, C., Chauhan, P. S., Saxena, K. K., & Shukla, R. K. (2024). Investigating the effect of zirconium dioxide micro and nano particles on the mechanical characteristics of Al-7075 alloy. Advances in materials and processing technologies, 1–14. (ESCI/ Scopus)
  https://doi.org/10.1080/2374068X.2024.2379100
• Chandra, U., Chauhan, P.S., Porwal, R.K. and Sharma, A.K. (2022). Microstructure and structural comparison between additively manufactured metal and ceramics, Int. j. vehicle structures & systems, 14(5), 655-662. (Scopus)
  https://doi.org/10.4273/ijvss.14.5.19
• Chauhan, P. S., Dwivedi, R. K. & Agarwal, A. (2022). Implementation of FMECA on industrial tool room cooling system, Int. j. of materials, mechanics, mechatronics and manufacturing,1, 11-18
  https://theaspd.com/index.php/ijes/article/view/3182/2423
• Chauhan, P. S., Sharma, S., Gupta, D., Gupta, R., Soni, P., Khan, B. & Prajapati, J. (2022). Fault Diagnose of Gear Box: A Case Study, Int. j. of materials, mechanics, mechatronics and manufacturing,1, 19-26.
  https://yajurvedam.in/ij4m/download/IJ4M004.pdf
• Singh, R., Narwariya, M., Sharma, A. K., Chauhan, P. S., & Singh, R. (2022). Design and fabrication of epoxy-based hip implant. International journal of materials engineering innovation, 13(4), 346-359. (Scopus)
  https://doi.org/10.1504/IJMATEI.2022.10047998
• Saraswat, Ashish; Premanand S; Sharma, Avadesh and Pandit, PremPrakash (2020). Tensile and Bending Analysis of Composite Material. International Journal of Advance Science and Technology, 29(10S), 6598-6606. (Scopus)
  http://sersc.org/journals/index.php/IJAST/article/view/23122
• Kumar, Sumit; Chauhan, Premanand S; Sharma, Avadesh and Agrawal, Anupma (2020). Analysis of Temperature Dependent Creep Behaviour of Aluminium Bar. International Journal of Advance Science and Technology, 29(10S), 6256-6263. (Scopus)
  http://sersc.org/journals/index.php/IJAST/article/view/23081
• Tewari, Satosh Kumar; Dubey, Jitendra and Chauhan, Premanand S (2020). Modelling, FEA and optimization of backhoe excavator attachment for maximum machine life. SSRG International journal of mechanical engineering, 7(2), 5-15.
  https://doi.org/10.14445/23488360/IJME-V7I2P102
• Tewari, Satosh Kumar and Chauhan, Premanand S (2020). Modelling, FE Analysis and optimization of the components of backhoe: a review. International journal of engineering development and research, 8(1), 278-284.https://rjwave.org/ijedr/papers/IJEDR2001054.pdf
• Sharma, A. K.; Sharma, P.; Chauhan, Premanand S. and Bhadoria, S. S. (2018). Study on harmonic analysis of functionally graded Plates using FEM. Int. J. of Applied Mechanics and Engineering, 23 (4),941-961. (Scopus)https://doi.org/10.2478/ijame-2018-0053
Read More

International Journal Pub.

• Saraswat, N., Chauhan, P. S. and Hussian, J. (2018). Finite element analysis of NCI, GCI and EN 18 materials camshafts. European journal of mechanical engineering research, 5(2), 24-34.
  https://www.eajournals.org/wp-content/uploads/Finite-Element-Analysis-of-NCI-GCI-and-EN-18-Materials-Camshafts.pdf
• Dhakar, Pooran Singh; Chauhan, Premanand S. and and Sengar, Vasudev Singh (2018). Analysis the effect of shape and depth of notch on twisting strength of medium carbon steel 40C8 Bar. Asian journal of innovative research, 10-15. (Scopus)
  https://www.academia.edu/72457081/Engineering_ANALYSIS_OF_EFFECT_OF_SHAPE_AND_DEPTH_OF_NOTCH_ON_TWISTING_STRENGTH_OF_MEDIUM_CARBON_STEEL_40C8_BAR_ASIAN_JOURNAL_OF_INNOVATIVE_RESEARCH?uc-sb-sw=23798030
• Dhakar, Pooran Singh; Chauhan, Premanand S. and and Sengar, Vasudev Singh (2018). Effect of shape of notch on twisting strength of EN 8 material. Asian journal of innovative research, 3(1) 07-12. (Scopus)
  https://www.academia.edu/79201886/Effect_of_Shape_of_Notch_on_Twisting_Strength_of_EN_8_Material
• Hasan, Saiyed Javed., Chauhan, Dr. P. S., Bansal, Ashutosh., & Gupta, Adviteeya. (2017). Effect of Shape of Notch on Tensile Strength of EN 8 Material. International Journal of Scientific Research in Science, Engineering and Technology, 3(3), 85-89. (Scopus)
  https://ijsrset.com/home/issue/view/article.php?id=IJSRSET173312
• 17. Saraswat, N. and Chauhan, P. S. (2017). Finite element analysis of nodular cast-iron camshaft. International journal of engineering research and technology, 5(6), 238-242.
  https://www.ijert.org/research/finite-element-analysis-of-nodular-cast-iron-camshaft-IJERTV6IS050132.pdf
• Chauhan, Dr. P.S. (2017). “Finite element analysis of nodular cast-iron camshaft”. International Journal of Engineering Research and Technology,5(6), 238-242.
  https://doi.org/10.1504/IJMATEI.2022.10047998
• Gupta, Sachin, & Chauhan, Premanand S., (2016). Stress analysis of bevel gear tooth using FEA: A review, International Journal for Scientific Research & Development, 4(2), 1325-1328.
  https://issuu.com/ijsrd/docs/ijsrdv4i21363
• Gupta, Sachin, Chauhan, Premanand S., & Hussain, J (2016). Stress analysis of bevel gear tooth using FEA, International journal of engineering technology science and research, 3(5), 116-121.
• Bhaduria, Omvir Singh, Goyal Sanjay and Chauhan, Premanand S. (2016). Application of taguchi for optimization of process parameters for minimum surface roughness in turning of 45C8. International Journal of Current Engineering & Scientific Research, 1(3), 47-54.
  https://troindia.in/journal/ijcesr/vol3iss1/61-68.pdf
• Gupta, Adviteeya, Chauhan, Premanand S. and Arya, Prabhu Dayal (2016). Effect of hardness and notch on tensile strength of v-notched SUP 9A BAR. International Journal of Current Engineering & Scientific Research, 1(3), 158-166.
  https://troindia.in/journal/ijcesr/vol3iss1/133-141.pdf
• Sharma, Avadesh K., Chauhan, Premanand S., Narwariya, Manoj and Pankaj, Rajkumar(2016). Vibration Analysis of functionally graded plates with multiple circular cutouts. International Journal of Current Engineering & Scientific Research, 2(3), 15-21.
  https://troindia.in/journal/ijcesr/vol3iss1part2/89-95,%20071.pdf
Read More

International Journal Pub.

• Chauhan, Premanand S., Dwivedi, Ravi K. and Sharma Sudhir (2016). Optimization of surface roughness of a drilled hole on SUP 11A by taguchi's optimization technique. International Journal of Current Engineering & Scientific Research, 2(3), 142-148.
  https://troindia.in/journal/ijcesr/vol3iss1part2/142=148,%20088.pdf
• Gupta, Adviteeya and Chauhan, Premanand S. (2015). Effect of hardness and notch on strength of SUP 9A: a review. International Journal of Science and Engineering, 3 (2), 116-122.
• Narwaria, Uttam S., Chauhan, Premanand S. and Husain, Juber (2015). Finite difference formulation of fin for electronics cooling.International journal of emerging technology and advanced engineering, 5(7), 431-435.
  https://www.ijetae.com/files/Volume5Issue7/IJETAE_0715_72.pdf
• Narwaria, Uttam S., Chauhan, Premanand S. and Husain, Juber (2015).Finite difference simulation of fin for electronics cooling.European Journal of Advances in Engineering and Technology, 2(9), 34-38.
  https://ejaet.com/PDF/2-9/EJAET-2-9-34-38.pdf
• Pandit,Prem Prakash and Chauhan, P. S. (2015).Unsteady simulation of rectangular fin for cooling of automobile engine. International research journal of management science and technology, 6 (4), 124-133.
  http://www.irjmst.com/abstractview/3463
• Pandit, Prem Prakash and Chauhan, P. S. (2015). Numerical study of rectangular fin for cooling of automobile engine.ELK Asia Pacific journal of mechanical engineering research, 1(2), 1-7.https://www.academia.edu/19663280/Unsteady_Simulation_of_Rectangular_Fin_for_Cooling_of_Automobile_Engine_Unsteady_Simulation_of_Rectangular_Fin_for_Cooling_of_Automobile_Engine
• Chauhan, P. S.and Agrawal, C. M. (2014). Identification of manufacturing defects leading to rejection during manufacturing of stabiliser bar. International journal of productivity and quality management, 14 (4), 408–422. (Scopus)
  https://doi.org/10.1504/IJPQM.2014.065551
• Chauhan, P. S., Agrawal, C. M. and Dwivedi, R. K. (2014). Effect of material and process parameter on dimensions of rolled external threads. Applied mechanics and materials journal, 493, 453-460.https://www.scientific.net/AMM.493.453
• Chauhan, P.S. and Arora, K.C.(2009). Experimental study of effect of surface roughness of blank diameter on external threads.International journal of manufacturing technology and management, 17 (4), 386-395. (Scopus)
  https://doi.org/10.1504/IJMTM.2009.023955

International Conf. Pub.

• Rathore, R., Velusamy, Y., George, D., Kumar, B. V., Chauhan, P. S., and Priyanka, T. P. (2025). A Novel Approach for Crowd Analysis and Density Estimation by using Machine Learning Techniques, IEEE Madhya Pradesh Section Conference (MPCON), Jabalpur, India, 2025, pp. 107-111. (Scopus)
  https://doi.org/10.1109/MPCON66082.2025.11256598
• Chakrawarti, R. K., Pathik, N., Chauhan, P. S. and Jaiswal, L.(2025). NMT framework for verse translation from hindi to english with CDEC, 2025 First International Conference on Advances in Computer Science, Electrical, Electronics, and Communication Technologies (CE2CT), Bhimtal, Nainital, India, 2025, pp. 457-464 (Scopus)
  https://doi.org/10.1109/CE2CT64011.2025.10939390
• Pachorkar, P., Chauhan, P. S., Pawar, A., Yadav, A. S., & Agrawal, N. (2025). Design and Development of Programmable and UV‐Based Automated Disinfection for Sanitization of Package Surfaces. Information Visualization for Intelligent Systems, 371-379 (Scopus) https://doi.org/10.1002/9781394305810.ch26
• Sharma, J., Nayak, C., & Chauhan, P. S. (2023). Studies and scientific research analysis of aluminium (Al7075) metal matrix composite surface morphology. Materials Today: Proceedings, 103, 388-393. (Scopus)
  https://doi.org/10.1016/j.matpr.2023.09.032
• Raja, N., Kumar, A, Chauhan, P. S. & Agarwal, A. (2023). Finite element modelling and microstructural correlation of hot forged Al-Zn-Mg-Cu alloy (T6) using DEFORM-3D. Materials Today: Proceedings, 103, 328-335. (Scopus)
  https://doi.org/10.1016/j.matpr.2023.08.355
• Pandit, P. P., Shukla, R. K., & Chauhan, P. S. (2023). Analysis and investigation of efficacy of the nanoparticles on the mechanical properties of aluminium metal matrix composites: A review. Materials Today: Proceedings, 103, 76-80. (Scopus)
  https://doi.org/10.1016/j.matpr.2023.08.122
• William, P., Shrivastava, A., Chauhan, P.S., Raja, M., Ojha, S.B., Kumar, K. (2023). Natural Language Processing Implementation for Sentiment Analysis on Tweets. In: Marriwala, N., Tripathi, C., Jain, S., Kumar, D. (eds) Mobile Radio Communications and 5G Networks. Lecture Notes in Networks and Systems, (Vol. 588, pp. 317-327), Springer, Singapore. (Scopus)
  https://doi.org/10.1007/978-981-19-7982-8_26
• Chauhan, P. S., Sen, M., & Agarwal, A. (2023, May). Manufacturing of non-threaded fasteners: an analysis of non-conformities during manufacturing process and abatement. In Journal of Physics: Conference Series (Vol. 2484, No. 1, p. 012056). IOP Publishing. (Scopus)
  https://doi.org/10.1088/1742-6596/2484/1/012056
• Koria, C. S., Kumar, R., & Chauhan, P. S. (2023, May). Reinforcement of micro and nano material with aluminum alloy (Al7075) metal matrix composite: a review. In Journal of Physics: Conference Series (Vol. 2484, No. 1, p. 012023). IOP Publishing.(Scopus)
  https://doi.org/10.1088/1742-6596/2484/1/012023
• Ojha, A., Chauhan, P. S., Sharma, A. K., & Agarwal, A. (2022). Investigation of creep behaviour on copper rod at multiple temperature. Materials Today: Proceedings, 62, 6341-6347. (Scopus) https://doi.org/10.1016/j.matpr.2022.02.551
Read More

International Conf. Pub.

• Kumar, R., Chauhan, P. S., Dwivedi, R. K., Singh, A. P., & Prasad, J. (2022). Design and development of ball dispenser Machine through lean manufacturing tool Poka-Yoke technique in automobile industries. Materials Today: Proceedings, 62, 6530-6533.(Scopus)
  https://doi.org/10.1016/j.matpr.2022.04.335
• Kumar, J. P., Chauhan, P. S., & Pandit, P. P. (2022). Time domain vibration analysis techniques for condition monitoring of rolling element bearing: A review. Materials Today: Proceedings.(Scopus)
  https://doi.org/10.1016/j.matpr.2022.02.550
• Jain, A., Agarwal, A., & Chauhan, P. S. (2022). Optimization of laser cutting quality characteristics for basalt–glass hybrid composite using hybrid approach. Materials Today: Proceedings, 62, 6578-6582.(Scopus)
  https://doi.org/10.1016/j.matpr.2022.04.578
• Agrawal, S.; Chauhan, P. S. & Pandit, P. P. (2021, June). Design optimisation of air filters using ANSYS fluent; IOP Conf. Series: Materials Science and Engineering 1136, 011001.
  https://doi.org/10.1088/1757-899X/1136/1/012077
• Iqbal, M. D.; Chauhan, P. S.; Sharma, A. & Pandit, P. P. (2021, June). Creep behaviour analysis of brass bar on variable temperature; IOP Conf. Series: Materials Science and Engineering 1136, 011001.
  https://doi.org/10.1088/1757-899X/1136/1/012076
• Singh, A.; Chauhan, P. S.; Pandit, P. P. & Narwariya, M. (2021, June). Effect of notch fillet radius on tensile strength of 817M40 notched bar; IOP Conf. Series: Materials Science and Engineering 1136, 011001.
  https://doi.org/10.1088/1757-899X/1136/1/012070
• Porwal, R. K; K. Vinod; Chauhan, P. S. & Shukla, R. K. (2021, June). An overview to micro-wire-electrical discharge machining; IOP Conf. Series: Materials Science and Engineering 1136, 011001.
  https://doi.org/10.1088/1757-899X/1136/1/012021
• Soni D., Sharma A.K., Narwariya M., Chauhan P.S. (2021) Effect of Low Weight Fraction of Nano-reinforcement on Tensile Properties of Polymer Nanocomposites. In: Muzammil M., Chandra A., Kankar P.K., Kumar H. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore.
  https://doi.org/10.1007/978-981-15-8704-7_90
• Narwariya M., Chauhan P.S., Sharma A.K., Yadav Y.S. (2021) Dynamic Analysis of Isotropic Annular Plate with Eccentric Hole Using Finite Element Method. In: Muzammil M., Chandra A., Kankar P.K., Kumar H. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore.
  https://doi.org/10.1007/978-981-15-8704-7_89
• Priyadarshi S., Chauhan P.S., Singh R.P. (2020, October). Design and Analysis of Progressive Die for Manufacturing the Gasket Part. In: Arockiarajan A., Duraiselvam M., Raju R. (eds) Advances in Industrial Automation and Smart Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Singapore.
  https://doi.org/10.1007/978-981-15-4739-3_12
• Narwariya, Manoj; Sharma, Avadesh K, Patidar, Vinod and Chauhan, Premanand S. (2019, May). Harmonic Analysis of Symmetric and Anti-Symmetric Laminated Skew Plate Using Finite Element Method; IOP Conf. Series: Materials Science and Engineering 691, 012007.
  Doi:10.1088/1757-899X/691/1/012007
Read More

International Conf. Pub.

• Chauhan, P. S.and Agrawal, C. M. (2013, August). Optimization of blank parameters of rolled threads by Taguchi method; Proceedings of International Conference on Future Trends in Structural, Civil, Environmental and Mechanical Engineering,Bangkok, 94-99.
• Chauhan, P. S.and Arora, K. C. (2006, August). Experimental Study of Effect of Surface Roughness of Blank Diameter on External Threads when Threads are manufactured by Rolling Process on Sup 9A Material; Proceeding of International Conference on Manufacturing Science and Technology, Melaka, Malaysia, 86-89.

National Conference Pub.

• Gupta, Dheeraj & Chauhan, P. S. (2006, March). Femto Second Laser Machining, National Conference on Advances in Mechanical Engineering, Kota (pp. 193-198). Kota Engineering College.
• Nivedit, B., Chauhan, P.S. & Yadav, Mahesh (2006, March). Silicon Microsystems for Automotive Applications, National Conference on Emerging Trends in Communication & Control Technologies, Banmore (pp. 81-94). ShriRam College of Engineering & Management.
• Chauhan, P. S., Jain, Vivek & Gupta, Dheeraj (2006, October). Thread Rolling Process and Effect of Blank Dimension on External Threads, National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME’06), Bathinda, Punjab (pp. 116-120). Giani Zail Singh College of Engineering & Technology.
• Agrawal, S.K. & Chauhan, P. S. (2006, October). Alternative Refrigerants for Automobile Air Conditioning, National Conference on Advancements & Futuristic Trends in Mechanical & Materials Engineering (AFTMME’06), Bathinda, Punjab (pp. 255-258). Giani Zail Singh College of Engineering & Technology.
• Agrawal, Manish & Chauhan, P. S. (2006, November). Bio Diesel: A Viable Alternative/Supplement to Fossil Fuel, National Conference on Energy & Environment (NCEE- 06), Jaipur. Jaipur Engineering College.
• Kakwani, N., Agrawal, S. K., & Chauhan, P. S. (2006, November). Vehicular Pollutants and its control by Modern Technology, National Conference on Energy & Environment (NCEE- 06), Jaipur (pp. 166-173). Jaipur Engineering College.
• S. K., & Chauhan, P. S. (2006, December). Analysis of Existing Maintenance Procedure of Crawler Crane (A Case Study), National Conference on Condition Monitoring (NCCM- 06), Visakhapatnam (pp. 157-163). Condition Monitoring Society of India.
• Saxena, Piyush, Soni, P. & Chauhan, P. S. (2007, April). Design of Cams for Single Spindle Automatic Lathe for Closing Screw, National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07), Banmore. ShriRam College of Engineering & Management.
• Sharma, K.K., Saxena, B. M., Sharma, A. K., Pachorkar, P. & Chauhan, P. S. (2007, April). Design and Analysis of Drill Jig to increase the Productivity of Hollow Stud, National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07), Banmore. ShriRam College of Engineering & Management.
• Saxena, Priyank, Sharma, A. K., Pachorkar, P. & Chauhan, P. S. (2007, April). Experimental Study of the Influence of a Baffle on the Dynamic Response of a Partially filled Cylindrical Container, National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07), Banmore. ShriRam College of Engineering & Management.
• Singh, R. K., Shrivastava, R. M., Agrawal, S. K. & Chauhan, P. S. (2007, April). Experimental Study of using Different Blends of Bio-Diesel & Diesel and its Effect on the Performance of Diesel Engine, National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07), Banmore. ShriRam College of Engineering & Management.
• Agrawal, M., Agrawal, M., Mandal, A. K., Agrawal, S. K. & Chauhan, P. S. (2007, April). Internal Recirculation Circulating Fluidized Bed Combustion Boiler, National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME- 07), Banmore. ShriRam College of Engineering & Management.
Read More

Books/Chapters/Proceedings/
Journal Editorial Positions

• Rathore, S. P. S., Sharma, R., Chauhan, P. S., Tripathi, A. (2025). Robotic technology's impact on environment and social perspective. In R. Singh, A. Gehlot & S. Maini (Eds.), Robot automation (1st ed.). Taylor & Francis Group.
• Rathore, R., Chauhan, P. S., Bharadwaj, P., Rawat, A. S. (2025). Opportunities and challenges ahead in robotic technology. In R. Singh, A. Gehlot & S. Maini (Eds.), Robot automation (1st ed.). Taylor & Francis Group.
• Editor-in-chief of International Journal on Materials, Mechanics, Mechatronics and Manufacturing (peer reviewed journal).
• Guest Editor for the international journal “Journal of Micromanufacturing (SAGE Publications)” for the special issue on "Developments in Micromachining Processes”, published on June 30, 2025. (Online ISSN: 2516-5992).
  https://journals.sagepub.com/doi/full/10.1177/25165984251351129
• Editor of a book entitled “Information Visualization for Intelligent Systems” published by Scrivener Publishing (Wiley Online) on February 28, 2025 (Online ISBN 9781394305810).
  https://www.wiley.com/en-us/Information+Visualization+for+Intelligent+Systems+-p-9781394305780
• Editor of a book entitled “Biomedical Implants: Materials, Design and, Manufacturing” published by CRC Press, Taylor and Francis Group on February 14, 2024 (ISBN 9781032428406).
  https://www.routledge.com/Biomedical-Implants-Materials-Design-and-Manufacturing/Dwivedi-Chauhan-Sharma-Singh-Agarwal/p/book/9781032428406
• Editor-in-chief of ISBN Proceedings of International Conference on Machine Intelligence and Cyber Physical Systems (ICMICPS - 2023) held on December 23-24, 2023 (ISBN: 978-93-100-0082-5).
  https://sdbc.ac.in/icmicps/images/ICMICPS_Proceedings.pdf
• Editor of Materials Today: Proceedings of Third International Conference on Materials, Mechanics, Mechatronics and Manufacturing (IC4M - 2023) held on April 15-16, 2023 (Volume 103).
  https://www.sciencedirect.com/journal/materials-today-proceedings/vol/103/suppl/C
• Editor-in-chief of IOP Conference Series: Journal of Physics, Proceedings of International Conference on Material Science, Mechanics, and Technology (ICMMT - 2022) held on December 23-24, 2022.
  https://iopscience.iop.org/article/10.1088/1742-6596/2484/1/011001/meta
• Editor-in-chief of ISBN Proceedings of International Conference on Material Science, Mechanics, and Technology (ICMMT - 2022) held on December 23-24, 2022 (ISBN: 978-93-5680-256-8).
  https://sdbc.ac.in/icmmt/images/ICMMT-Proceedings.pdf
• Chauhan, Premanand S. and Agrawal, Atul (2022), Industrial Automation and Cutting-Edge New Generation Technologies based on Industry 4.0, Scientific International Publishing House, ISBN: 9789356253674
• Editor of Materials Today: Proceedings of International Conference on Materials, Mechanics, Mechatronics and Manufacturing (IC4M - 2022) held on April 09-10, 2022 (Volume 62, Part 12).
  https://www.sciencedirect.com/journal/materials-today-proceedings/vol/62/part/P12                      Read More

Books/Chapters/Proceedings/
Journal Editorial Positions

• Editor-in-chief of Proceedings of International Conference on Environmental Sustainability and Construction Technology (ICESCT 2021) held on December 18, 2022, ISBN: 978-81-954860-4-5.
• Editor-in-chief of IOP Conference Series: Material Science and Engineering, Proceedings of International Conference on Materials, Mechanics, Mechatronics and Manufacturing (IC4M - 2021) held on March 06-07, 2021 (Volume 1136).
  https://iopscience.iop.org/issue/1757-899X/1136/1
• Taguchi Approach, Published by LAP LAMBERT Academic Publishing (September 04, 2017), ISBN:978-33-30325-85-2.
• Notch Sensitivity, Published by LAP LAMBERT Academic Publishing (June 14, 2017), ISBN:978-33-30331-65-5.
• Editor of proceedings of International Conference on Futuristic Trend in Engineering, Science, Humanities, and Technology (FTESHT- 2016) Volume-I, II & III, ISBN: 978-93-85225-55-0.

Patents

• Artificial intelligence based method for computer-aided progressive die design. Application no. 201941037055. Date of Filing: 14/09/2019 and Date of Publication: 20/09/2019.


• Vulcanizing fixture machine for tyre and detection method thereof. Application no. 201921052332. Date of Filing: 17/12/2019 and Date of Publication: 20/12/2019.

Achievements/ Awards

• ज्ञानार्थ 𝗘𝗱𝘂𝗰𝗮𝘁𝗶𝗼𝗻 𝗔𝘄𝗮𝗿𝗱 𝟱.𝟬 awarded by Gurukul Dream Foundation; conferred by Shri Narendra Singh Tomar, Hon’ble Speaker, Madhya Pradesh Legislative Assembly (Sept 07, 2025).
• Certificate of Excellence for outstanding contribution in education (AY 2022–23) awarded by Bansal Group of Institutes; conferred by Shri V. D. Sharma, Hon’ble President – BJP & Member of Parliament, Madhya Pradesh (May 11, 2023).
• Best Academics & Placement Award, conferred by Shri Prahlad Singh Patel, Hon’ble Minister of State, Govt. of India, at Bansal News event (Jan 05, 2023).
• Certificate of Excellence for contribution to education (AY 2021–22) awarded by Bansal Group of Institutes; conferred by Shri Shivraj Singh Chauhan, Hon’ble Chief Minister, Madhya Pradesh (Apr 14, 2022).
• Director of the Year 2022, awarded by Universal Mentors Association, Aug 27, 2022.
• Exemplary Academic Administrator recognition, awarded by uLektz Academic Council (2019).
• Excellence Award for reducing in-process non-conformities during machining operations, awarded by Gayatri Auto Industries, Gwalior (2015).
• Best Project Award at IIT Bombay for Laser Beam Machining project (June 07, 2007).
• Nominated and approved for Udyog Bharati Award, 2005.
• M.I.T.S. Gold Medal – topper in all branches of M.Tech (2005).
• M.I.T.S. Gold Medal – topper, M.Tech (Production Engineering) (2005).
• Topper in all semesters of M.Tech program.
• Technical Award for Kaizen-based collar bolt redesign at Gayatri Auto Industries (1998).
• Awarded Merit Certificate by Govt. of Madhya Pradesh for High School performance.
• Scored 800/800 in Analytical Section of GRE (2001).

M.Tech Theses Supervised

Ph.D Thesis Supervised

Subject Taught

Strength of Materials, Machine Design, Fluid Mechanics, Engineering Graphics, Production Engineering, and Machine Drawing

Note & PPT's

• Difference between Fluids and Solids

• Types of Fluid